RAYN Installation Guide
Lyda Lamp Head and LED Driver
RAYN Growing Systems
| Middleton, WI | +1 844 907 RAYN
© 2022 RAYN Growing System, LLC. | All Rights Reserved.
Trademark and patent info:
| All product
information and specifications subject to change. | RAYN intends this
document to be provided in its entirety.
7431M2100
Rev B Released 2022–05
r a y n g r o w i n g s y s t e m s . c o m
The Lyda lamp head ships complete the LED driver and the cables required for On/Off
operation utilizing mains power.
Rotate
clockwise
to disconnect
Rotate
counter-
clockwise
to connect
6
5
3
2
7
4
(3 m [10 ft])
1
2
ID
Description
Notes
1
LEDs
Available in Sun Spectrum (5000K) LEDs or White plus Deep
Red LEDs
2
Suspension
Points
Each end cap offers three suspension points. One on top for
straight down installation, and two others for sideways
installation. The lamp head must be supported on both ends
when installed.
3
Lamp Cable
Input
Attach the lamp cable from the LED Driver to the lamp head
input receptacle. Rotate the locking ring counter-clockwise to
connect the Lamp Cable to the lamp head. Rotate the locking
ring clockwise to disconnect the Lamp Cable from the lamp
head.
4
Lamp Cable
The lamp cable between the driver and the lamp head is
provided (3 m [10 ft]).
5
1-10 V
Dimming
Input
Optional use for dimming control. Remove the protective
cover for connection of a DMX Adapter or a third-party 1-10 V
dimming controller.
6
LED driver
The power source for one Lyda lamp head and auxiliary power
for the DMX Adapter accessory. See
for details.
7
Input Power
Cable
Adapter
Attachment point for a regional specific power cable. Available
with regional specific connector or bare ends. See the
Lyda
System Installation and User Manual
for details.
