Chapter 1: SmartPilot Operation
11
3. The display automatically returns to the previous mode if you do not press a
button for 10 seconds:
• if you press another mode button within 10 seconds you will select the
mode assigned to that button (for example:
auto
selects Auto mode,
standby
selects Standby mode).
Notes: (1)
You can also adjust the lighting level from any other SeaTalk instrument
or control unit.
(2)
When you switch off the unit you lose any changes you have made to
the lighting level.
How do I adjust the contrast?
To set the display contrast level:
1. With the autopilot in Standby mode, press the
disp
button for one second to
access the
LAMP
screen.
2. Press the
disp
button for one second again, to display the
CONTRAST
screen.
3. Use the
up
and
down
arrow buttons to set the required contrast level (from
1
to
15
).
4. The display automatically returns to the previous mode if you do not press a
button for 10 seconds:
Note:
if you press another mode button within 10 seconds you will select the mode as-
signed to that button (for example:
auto
selects Auto mode,
standby
selects Standby
mode).
D5517-2
1 second
Summary of Contents for SmartPilot ST8002
