background image

Chapter 3: Fault Finding & Maintenance

31

EMC advice

• When powered up, all electrical equipment produces electromagnetic fields. 

These can cause adjacent pieces of electrical equipment to interact with one 
another, with a consequent adverse effect on operation. 

• To minimize these effects and enable you to get the best possible perfor-

mance from your Raymarine equipment, guidelines are given in the installa-
tion instructions, to enable you to ensure minimum interaction between 
different items of equipment, i.e. ensure optimum Electromagnetic Compati-
bility (EMC).

• Always report any EMC-related problems to your nearest Raymarine dealer. 

We use such information to improve our quality standards.

• In some installations, it may not be possible to prevent the equipment from 

being affected by external influences. In general this will not damage the 
equipment but it can lead to spurious resetting action, or momentarily may 
result in faulty operation.

Product support

Raymarine provides a comprehensive customer support service, on the world 
wide web and by telephone help line. Please use either of these facilities if you are 
unable to rectify a problem.

World wide web

Please visit the Customer Support area of our web site at:

www.raymarine.com

As well as providing a comprehensive Frequently Asked Questions section and 
servicing information, the web site gives e-mail access to the Raymarine Technical 
Support Department and a details of the locations of Raymarine agents, 
worldwide.

Telephone help line

If you do not have access to the world wide web, please call our help line.

In the USA

, call:

• +1 800 539 5539, extension 2444 or
• +1 603 881 5200 extension 2444

In the UK, Europe the Middle East or the Far East

, call:

• +44 (0) 23 9271 4713 (voice)
• +44 (0) 23 9266 1228 (fax)

81269_1.book  Page 31  Wednesday, November 9, 2005  2:35 PM

Summary of Contents for SmartPilot ST6002

























































Reviews: