Chapter 2: System overviews
15
SeaTalk system with dedicated power supply
You can use a separate power supply to power the SeaTalk system if required. In this
instance do NOT connect the SeaTalk RED wire at the SPX SmartPilot SEATALK
terminal.
NMEA 0183 / other manufacturers’ equipment
Most Raymarine equipment will connect to your data system via SeaTalk
ng
or SeaTalk
(except for A-series, which connects via NMEA 0183). Other manufacturers’
equipment connects via NMEA cabling.
Instrument SeaTalk
bus 12 V power supply
(via breaker/fuse rated
at 5 A or less)
Sea
Ta
lk cable
SeaTalk instruments
SmartPilot
controller
SeaTalk bus
SmartPilot
computer
SMART
PILOT
Course computer
power supply
(via breaker/fuse)
D10440-1
Screen
Do not connect Red wire
(Cut back and insulate)
Yellow
87072-2.book Page 15 Thursday, November 22, 2007 8:43 AM
