Raymarine SL70M Owner'S Handbook Manual Download Page 121

Page: 121 / 145

6-28

SL70M & SL70C PLUS Pathfinder Radar Displays

Integ

ted System

Chec

6.9 Integrated System Checks

Received Data

If either SeaTalk or NMEA In is connected, verify that the expected data is
displayed.

1. Press

DISPLAY

and select the

NAV DATA WINDOW ON.

Check that the expected data is displayed.

2. If heading data is connected select Radar mode and check heading is dis-

played in the Status Bar.

Transmitted Data

If SeaTalk or NMEA Out is being transmitted to other equipment, check that
the data is being received correctly.

An NMEA Out connector is used to transmit navigation data. The NMEA
Output cable should be connected to the upper, left connector on the rear of the
display unit.

Note:

The NMEA Output cable has a ferrite clamp attached to ensure EMC

conformance.

Summary of Contents for SL70M


















































































































































Search results

Summary of Contents for SL70M

Reviews:

Related manuals for SL70M

Brands by name

Popular brands

Raymarine SL70M, Owner'S Handbook Manual

Search results

Summary of Contents for SL70M

Reviews:

Related manuals for SL70M

Brands by name

Popular brands