12
SeaTalk Autopilot Hand-held Remote
Fault Finding
All Raymarine products are subjected to comprehensive test
procedures prior to packaging and shipment. In the unlikely event
that a fault does occur, the following check list should help to cure any
problem.
LED not illuminated
•
No power supply – check the red lead for +12 V.
•
Check the remote socket connections and the security of all
SeaTalk connectors and cables.
No exchange of information between the hand held remote
and the autopilot
•
Open circuit SeaTalk bus – check the yellow (data) lead for
fluctuating voltage.
•
Check the remote socket connections and the security of all
SeaTalk connectors and cables.
Unit does not operate autopilot
•
Autopilot not in Auto mode.
Note: No audible beep will be heard when operating the hand held
remote.
Spares List
The following items may be purchased from your local Raymarine
dealer should you need them.
Part Number
Description
D161
SeaTalk socket assembly only
D162
Plug and socket assembly
D211
Spade connector kit for ST4000 and ST5000
D224
Hand-held remote storing bracket
D330
Socket O-ring
81197_1.book Page 12 Wednesday, August 1, 2001 11:19 AM
