SeaNet-Alarm Users Manual
Pushbutton and LED's
SeaNet-Alarm has 1 pushbutton and three LED's.
The pushbutton has two functions:
1.
Alarm acknowledge
If an alarm is active, it can be acknowledged by pressing the pushbutton for about 1
second. Acknowledge will switch off the alarm.
2.
Temporarily disable Timer Alarm
The main purpose for timer alarm is to wake single handed sailors after a period of
time so that they can check the boat and the cruising environment.
During daytime this function might not be needed. It can be switched off without
having to have the computer connected.
Press the pushbutton for more than 7 seconds.
The status led will blink slower ( approx every 4 seconds)
Timer alarm is now disabled.
Press the pushbutton for more than 7 seconds again.
The status led will blink faster again ( approx every second)
Timer alarm is now enabled again.
LED's
Status Led blinking every second
: Device active, Timer alarm enabled
Status Led blinking every 4 seconds
: Device active, Timer alarm
disabled
SeaNet-Alarm V1.0
Page 16 of 19
