17
Twin IRDs
You can connect two IRDs to your antenna as shown in the following
diagram.However, only one of the IRDs can be configured as a two satellite
receiver. The other IRD needs to be configured as a one satellite receiver.
The two satellite receiver determines which satellite is tracked, while the
other receiver can watch any channel which is available from the tracked
satellite.
As in the single IRD option the RF cables from the antenna base plate
should be connected to ‘LNB’, ‘ANT’, or ‘Satellite In’ on the rear panel of
the IRD.
Full details on configuring your system IRDs will be found in the relevant
Manufacturer’s handbook.
Television Monitor 1
IRD 1
Television Monitor 2
IRD 2
Antenna baseplate
RF1
RF2
POWER
D9278_1
81258_3.book Page 17 Wednesday, November 8, 2006 2:06 PM
Summary of Contents for Satellite TV Systems
