Raymarine RVX1000, Installation Instructions Manual

Page: 72 / 108

4.5 Network connection
The unit must be connected to a compatible Raymarine multifunction display to enable echo sounder
data to be viewed.
Multifunction display connection
Unit connected to a multifunction display using a RayNet cable.
Note: The connection panel on your product may look slightly different to that shown, depending
on variant. The network connection method remains the same for all products featuring RayNet
connectors.
Item Description
1
RVX1000 sonar module
2 Connector panel for compatible Raymarine multifunction display
3 RayNet cable
Multifunction display connection (extended cables)
When the required length of a single network cable run is greater than 20 m (65.6 ft), a RayNet (male)
to (male) adaptor cable should be used to connect RayNet cables together .
Note: The connection panel on your product may look slightly different to that shown, depending
on variant. The network connection method remains the same for all products featuring RayNet
connectors.
72