Raymarine RVM-100, Installation Instructions Manual

Page: 8 / 56

Warning: Petrochemicals
Prolonged exposure to petrochemicals such as gasoline
and diesel oil etc. may cause the transducer to discolor and
degrade.
Warning: Anti-fouling
• Failure to comply with the provided anti-fouling and
transducer cleaning instructions may affect your product
warranty.
• Only use water-based anti-fouling paint.
• Do NOT use ketone or copper-based anti-fouling paint.
Regulatory notices
Declaration of Conformity
FLIR Belgium BVBA declares that the following products are in compliance
with the EMC Directive 2014/30/EU:
• RVM-100 RealVision™ Max 3D transom mount transducer, part number
A80703
The original Declaration of Conformity certificate may be viewed on the
relevant product page at
www.raymarine.com/manuals .
Disclaimer
Raymarine does not warrant that this product is error-free or that it is
compatible with products manufactured by any person or entity other than
Raymarine.
Raymarine is not responsible for damages or injuries caused by your use or
inability to use the product, by the interaction of the product with products
manufactured by others, or by errors in information utilized by the product
supplied by third parties.
Warranty registration
To register your Raymarine product ownership, please visit
www.raymarine.com and register online.
It is important that you register your product to receive full warranty benefits.
Your unit package includes a bar code label indicating the serial number of
the unit. You will need this serial number when registering your product
online. You should retain the label for future reference.
Product disposal
Dispose of this product in accordance with the WEEE Directive.
The Waste Electrical and Electronic Equipment (WEEE) Directive requires
the recycling of waste electrical and electronic equipment which contains
materials, components and substances that may be hazardous and present
a risk to human health and the environment when WEEE is not handled
correctly.
Equipment marked with the crossed-out wheeled bin
symbol indicates that the equipment should not be
disposed of in unsorted household waste.
Local authorities in many regions have established
collection schemes under which residents can dispose of
waste electrical and electronic equipment at a recycling
center or other collection point.
For more information about suitable collection
points for waste electrical and electronic equipment
in your region, refer to the Raymarine website:
www.raymarine.eu/recycling .
IMO and SOLAS
The equipment described within this document is intended for use on
leisure marine boats and workboats NOT covered by International Maritime
Organization (IMO) and Safety of Life at Sea (SOLAS) Carriage Regulations.
Technical accuracy
To the best of our knowledge, the information in this document was correct
at the time it was produced. However, Raymarine cannot accept liability
for any inaccuracies or omissions it may contain. In addition, our policy of
continuous product improvement may change specifications without notice.
As a result, Raymarine cannot accept liability for any differences between
the product and this document. Please check the Raymarine website
(
www.raymarine.com ) to ensure you have the most up-to-date version(s) of
the documentation for your product.
8