Raymarine RMK-9, Installation And Operation Instructoins

Page: 3 / 12

Handbook information
This handbook contains important information regarding
your product.
This handbook includes information to help you:
• plan your installation and ensure you have all the
necessary equipment;
• install and connect your product as a part of your
system of Raymarine electronics;
• obtain support if required.
This and other Raymarine product documentation
is available to download in PDF format from
www.raymarine.com .
Handbooks
The RayNet keypad has the following handbooks
available:
Handbooks
Description Part number
Installation and operation
instructions 81351
RMK-9 Mounting template 87187
Product information
The RMK-9 is a remote control keypad for Raymarine
multifunction displays. The keypad is a class 1 PoE
device and can be powered using a suitable network
connection providing PoE or can be powered directly
using the dedicated alternate power connector. The
keypad can be mounted horizontally or vertically with a
keypad mat for both orientations supplied.
A80217 RMK–9 keypad (Using
portrait keypad mat.)
A80217 RMK–9 keypad (Using
landscape keypad mat.)
Compatibility
The multifunction displays shown below are compatible
with the RMK–9 keypad.
• New a Series
• New c Series
• New e Series
• gS Series
Multifunction displays require software version 7.xx or
later.
Note: New a Series, New c Series and New e Series
displays cannot be powered on using the keypad.
Important information
Warning: Product installation
and operation
This product must be installed and operated
in accordance with the instructions
provided. Failure to do so could result in
personal injury, damage to your vessel
and/or poor product performance.
Warning: Potential ignition
source
This product is NOT approved for use in
hazardous/flammable atmospheres. Do
NOT install in a hazardous/flammable
atmosphere (such as in an engine room or
near fuel tanks).
Warning: Product grounding
Before applying power to this product,
ensure it has been correctly grounded, in
accordance with the instructions in this
guide.
Warning: Positive ground
systems
Do not connect this unit to a system which
has positive grounding.
Warning: Switch off power
supply
Ensure the vessel’s power supply is
switched OFF before starting to install this
product. Do NOT connect or disconnect
equipment with the power switched on,
unless instructed in this document.
Caution: Power supply
protection
When installing this product ensure the
power source is adequately protected by
means of a suitably-rated fuse or automatic
circuit breaker.
3