RAYCOM C
ELLULAR
(AMPS)
12
STEP 3. PHONE NUMBER SETUP
RAYCOM C
ELLULAR
(AMPS)
12
Step #6 - How to Override the Number of Dedicated Control Channels
Press:
# * 26 * _ _ #
The spaces represent your 2-digit range of Dedicated Control Channels. When
you first turn on the Raycom, it automatically scans up to 21 control channels
looking for your cellular provider. Then, it locks onto the strongest signal.
NOTE: the factory default setting is
21
channels. To change the number of
channels, you must enter a
2-digit
value in the range of
01
to
21
.
(For
instance, to set up 9 control channels, enter: #*26*09#.) If you enter the
range incorrectly, you'll hear three short tones followed by the programming
tone; if correct, you'll hear the programming tone again.
Step #7 - How to Override the System Preference.
Press:
# * 7 * _ #
The space represents your
1-digit
system preference.
enter:
0
for System “A” preferred
enter:
1
for System “B” preferred
enter:
2
for System “A” only
enter:
3
for System “B” only.
This sets the preference for your cellular provider. If you enter the
preference incorrectly, you’ll hear three short tones followed by the
programming tone; if correct, you’ll hear the programming tone again.
Step #8 - Hang up.
The flashing LED indicator will become solid GREEN.
Phone number setup is complete.
Optional A-Key (Authentication Code) Programming
Depending upon your cellular service provider, you may be required to enter
an Authentication Code (A-Key) before you make or receive any calls.
Contact
your service provider to determine whether A-Key is required.
☞
☞
☞
☞
☞
☞
IMPORTANT!
For security reasons, your complete A-Key is never transmitted over the
phone. However, you should keep the number in a safe place to prevent
counterfeiting, fraud or cloning.
!
