14
3. Fit the main support bracket to the spool valve cable connection on the steering system
(see
Figure 11
):
• position the main support bracket behind the spool valve cable connection
• fit the clamp around the spool valve cable connection
• put the spring washers on the four securing bolts
• tighten the bolts to secure the main support bracket
Figure 11:Fitting the main support bracket (Mercruiser 95)
4. Place the I/O drive’s pushrod end on the pivot assembly pin – the flat part of the pushrod
should rest on top of the pivot assembly.
5. Fit the R-clip to the pivot assembly pin to secure the I/O drive pushrod in place.
Main support bracket
Spool valve cable connection
Clamp
Bolts and
spring washers
D5181-1
81176_4.fm Page 14 Tuesday, April 18, 2006 9:26 AM