Raymarine GVM400, Installation Instructions Manual

Page: 19 / 34

1. GVM video module.
2. SeaTalk hs switch.
3. G-Series and SeaTalk hs devices.
4. S-Video source (for example, video camera).
5. S-Video connection (using the supplied R08274 S-Video
adaptor cable).
6. Stereo audio connection (using the supplied R08275 audio
cable). Only the S-Video and Composite 4 inputs support an
associated audio connection.
7. Composite video source (for example, video camera).
8. Illustration showing the labels for the video and audio
connections on the GVM video module.
Note: Each GVM400 video module supports 1 S-Video input, or
4 composite video inputs (reduced to 3 composite video inputs
if using S-Video input). If a thermal camera is connected to a
GVM video module no further video devices may be connected to
that GVM unit. The G-Series system supports a maximum of 3
GVM video modules, providing a total of 12 video inputs (less if
connecting S-Video or thermal camera devices).
Video cables
Cables for connecting video sources to the G-Series system.
Cable Part number Notes
1.5 m (4.9 ft) S-Video
adaptor cable R08274 Supplied with the GVM
video module.
Note: Refer to your dealer for suitable cables for connecting
composite video sources to the G-Series, and also for connecting
S-Video sources to the adaptor cable listed above.
Audio cables
Cables for connecting audio to the G-Series system.
Cable Part number Notes
1.5 m (4.9 ft) stereo
audio cable R08275 Supplied with the GVM
video module.
3 m (9.8 ft) stereo audio
cable R08266 Supplied with the GPM
processor unit.
15 m (49.2 ft) stereo
audio cable R08298
Cables and connections 19