Raymarine GPS 11, User Manual

Page: 40 / 77

Chapter 4: Operation
37
Activating a new Waypoint
Highlight NEW? on the menu bar and press the ENTER button.
A blank waypoint data page will appear.
editwp
Follow the procedure on page 31 Entering a Waypoint to complete
the form.
Check the data entered carefully and, with the VALID? setting
highlighted on the menu press ENTER to save the information..
Note: The new waypoint will be stored in memory and added to the
waypoint list.
If the information is incorrect you may use the trackpad arrows to go
back and highlight the setting to be changed or highlight CLEAR? on
the menu bar to clear the form and start again
To stop tracking to a waypoint highlight “ACTI?” on the menu bar
and press ENTER. “DEACTIVATE?” will be highlight on the menu
bar. Press ENTER, a warning page will be displayed.
stopwarn
Press ENTER to stop tracking to that waypoint.