Parts supplied
D
1
1
7
1
4
-2
1
2
4
x8
x4
x4
5
6
7
3
1.
Glass Bridge Monitor
2.
Mounting clips x 8 (GB150 only)
3.
Load spreading plate x 4 (GB150 only)
4.
Mounting brackets x 4(GB170 only)
5.
1.5 m (4.6 ft) Power cable
6.
5 m (16.4 ft) DVI-D cable
7.
Documentation — Users guide, warranty, surface mount cutting
template and multilingual CD
4.4 G-Series keyboard
The G-Series system supports the following keyboards:
• Command Center keyboard.
• Compact keyboard.
The Command Center keyboard (NOT Compact variant) can be
installed for 2 different types of use:
• Wired operation (flush mounted).
• Wireless operation, using the wireless upgrade kit and SeaTalk
ng
base station.
Location requirements
When selecting a location for the keyboard it is important to consider
a number of factors.
• Do NOT install near sources of heat or vibration (for example,
an engine).
• The keyboard is suitable for mounting both above and below
decks. It is waterproof to CFR-46 standard.
• Use the cutting template provided with the keyboard.
• Connect cable into keyboard before clamping in place.
80
G-Series installation instructions
Summary of Contents for G-Series system
