3.5 Surface mounting
The supplied mounting gasket and fixings can be used to surface mount the display.
Before mounting the display, ensure that you have:
• chosen a suitable location, using the guidance provided;
• identified the required cable connections and routed the cables to the mounting location.
1. Remove the 4 screw covers from the corners of the display.
2. Check the chosen mounting location. A clear, flat area with suitable clearance behind the panel is
required.
3. Fix the supplied mounting template to the chosen location using masking or self-adhesive tape.
4. Using a suitable hole saw (the size is indicated on the template), make a hole in each corner
of the cut-out area.
5. Using a suitable saw, cut along the inside edge of the cut-out line.
28
