RF exposure
This equipment complies with FCC / IC RF exposure limits for general population / uncontrolled
exposure. The wireless LAN / Bluetooth antenna is mounted behind the front facia of the display.
This equipment should be installed and operated with a minimum distance of 1 cm (0.39 in) between
the device and the body. This transmitter must not be co-located or operating in conjunction with any
other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures.
Compliance Statement (Part 15.19)
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two
conditions:
1.
This device may not cause harmful interference.
2. This device must accept any interference received, including interference that may cause
undesired operation.
FCC Interference Statement (Part 15.105 (b))
This equipment has been tested and found to comply with the limits for a Class B digital device,
pursuant to Part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates, uses, and can radiate radio frequency energy
and, if not installed and used in accordance with the instructions, may cause harmful interference to
radio communications. However, there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or television reception, which
can be determined by turning the equipment off and on, the user is encouraged to try to correct the
interference by one of the following measures:
1.
Reorient or relocate the receiving antenna.
2. Increase the separation between the equipment and receiver.
3.
Connect the equipment into an outlet on a circuit different from that to which the receiver is
connected.
4.
Consult the dealer or an experienced radio / TV technician for help.
Innovation, Science and Economic Development Canada (ISED)
This device complies with License-exempt RSS standard(s).
Operation is subject to the following two conditions:
1.
This device may not cause interference; and
2. This device must accept any interference, including interference that may cause undesired
operation of the device.
This Class B digital apparatus complies with Canadian ICES-003.
Innovation, Sciences et Développement économique Canada
(Français)
Cet appareil est conforme aux normes d'exemption de licence RSS.
Son fonctionnement est soumis aux deux conditions suivantes:
1.
cet appareil ne doit pas causer d'interférence, et
2. cet appareil doit accepter toute interférence, notamment les interférences qui peuvent affecter
son fonctionnement.
Cet appareil numérique de la classe B est conforme à la norme NMB-003 du Canada.
10
