Raymarine E70061 Installation And Operation Instructions Manual Download Page 32

Page: 32 / 62

6.5 Calibration

Before first use calibration procedures must be carried out to
ensure optimum performance of the instrument with the vessel.

The calibration procedures are:

• User calibration

• Intermediate calibration

• Group setup

• Dealer calibration

Note:

Group setup is for group illumination and is not part of

the calibration process.

User calibration

The i60 Close hauled wind is a repeat display and as such does
not require calibration, the steps below apply to the calibration of
the i60 Wind instrument only.

User calibration options include:

• Wind angle offset

• Wind speed units

Linearizing and aligning the wind transducer

You can linearize and align the wind transducer by following
the steps below.

You will need to be underway, with sufficient space to turn in a
large circle unhindered.

1. Slowly turn the vessel through 2 complete circles.

x 2

D12415-1

This procedure automatically linearizes the wind vane. A
successful linearization is indicated by the digital display
flashing and a buzzer sounding three beeps.

2. Press and hold the

Power

and

True / App

button

simultaneously for approximately 2 seconds to enter the user
calibration menu.

True

App

D12488-1

60 5

3. Press the

Power

button to display the wind angle offset page.

D12489-1

4. Sail your vessel directly into the wind and adjust the analog

pointer to 0, using the

VMG

and

Tack

buttons.

D12490-1

Ta ck

VMG

The VMG button will decrease the current value and the
Tack button will increase the current value. As you do this,
the wind angle offset shows the amount of correction you
have applied.

5. To exit the user calibration pages at any time press and

hold the

Power

and

True / App

buttons simultaneously for

approximately 2 seconds.

Selecting wind speed units

Wind speed units can be displayed in either knots or meters per
second. To change the wind speed units follow the steps below.

From the user calibration pages:

1. Press the

Power

button to display the wind speed units

page, or

D12491-1

2. Use the

VMG

and

Tack

buttons to select the required wind

units.

3. To exit the user calibration pages at any time press and

hold the

Power

and

True / App

buttons simultaneously for

approximately 2 seconds.

Intermediate calibration

Intermediate calibration allows you to:

i60 Wind

i60 Close hauled wind

Check instrument software version.

Check the instrument status (either
master or repeater).

60 5

D12492-1

CAL

True
App

Checking the software version

You can check the software version of the unit by following the
steps below.

During normal operation:
1. Press and hold the

Power

and

True / App

buttons

simultaneously for approximately 4 seconds.
The current software version is displayed. The software
version page will time-out automatically after 8 seconds of
inactivity.

2. Press the

Power

button to display the instrument status.

Checking the instrument status

You can check the instrument display's status by following the
steps below.

From the software version page:
1. Press the

Power

button.

The instrument status is displayed (r0 = master and r1
= repeater). The instrument status page will time-out
automatically after 8 seconds of inactivity.

Dealer calibration

The dealer calibration procedures include:

• Setting User calibration options on or off.

• Setting required wind angle and speed response.

• Setting the velocity made good (VMG) response.

• Setting boat show mode on or off.

• Restore factory default

Setting dealer calibration options

To set the dealer calibration options follow the steps below:

During normal operation:
1. Press and hold the

Power

and