Raymarine E-Series, Installation Instructions Manual

Page: 106 / 112

10.6 RayNet to RayNet cables and connectors
D13160-1
4
2 3
1
A80161 A62361 A80005 A62362 A80006
400 mm (1.3 ft) 2 m (6.56 ft) 5 m (16.4 ft) 10 m (32.8 ft) 20 m (65.6 ft)
A80162
100 mm (3.9 in)
R70014 A80262
Description Typical use Quantity
1 Standard RayNet connection cable
with a RayNet (female) socket on both
ends.
Suitable for connecting all RayNet equipment directly to
LightHouse multifunction displays featuring a RayNet
connector. Can also be used to connect RayNet equipment
via a RayNet network switch (e.g. HS5 ).
1
2
RayNet cable puller (5 pack).
These “handles” securely attach to the twist-lock on RayNet
cables, enabling you to pull the cables through conduits and
other obstacles.
5
3 RayNet to RayNet right-angle coupler
/ adapter.
Suitable for connecting RayNet cables at 90° (right angle) to
devices, for installations where space is limited. For example,
use this adapter to connect a
RayNet cable to a multifunction
display when there is not enough space behind the display for
the usual cable bend radius required by a standard RayNet
cable. This adapter features a
RayNet (female) socket at
one end, and a RayNet (male) plug at the other end.
1
4 Adapter cable with a RayNet (male)
plug on both ends.
Suitable for joining (female) RayNet cables together for
longer cable runs.
1
106 a Series / c Series / e Series installation instructions