Raymarine CP100, Installation Instructions Manual

Page: 17 / 48

Item Description Part number
1
Sonar module Refer to Related products .
2 RayNet cables Refer to 10.4 Network
cables for RayNet cables.
3 RayNet network switch A80007
4 Radar scanner Refer to your dealer for all
applicable part numbers.
5 Multifunction display Refer to your dealer for all
applicable part numbers.
6 DownVision transducer Refer to 3.5 Compatible
transducers .
7 Evolution ACU Refer to your dealer for all
applicable part numbers.
8 SeaTalk ng spur cable Refer to 10.5 SeaTalk ng
cables and accessories .
9 Evolution EV Refer to your dealer for all
applicable part numbers.
10 Pilot head controller
Refer to your dealer for all
applicable part numbers.
3.7 Tools
Installation of the unit requires the following tools:
1
2
3
4
D12228-2
Item Description
1 Drill
2 Pozidrive screwdriver
3 Drill bit of appropriate size*
4 Adhesive tape
Note: *Drill bit size is dependent on the thickness and type of
material that the unit is to be mounted on.
Planning the installation
17