&G1
500 Hz Guard Tone Enable
&G2
1800 Hz Guard Tone Enabled
&J0
RJ-11
Select
-DEFAULT
&J1
No
Function
&L0
Switched Line Select -
DEFAULT
&L1
Leased Line Select (Not Supported)
&M0
Asynchronous Mode -
DEFAULT
&P0
US Make/Break Ratio for Pulse Dialing
-DEFAULT
&P1
UK Make/Break Ratio for Pulse Dialing
&Q0
Same as &M0
&R0
Clear to Send (CTS) Follows RTS -
DEFAULT
&R1
CTS Always On
&S0
Data Set Ready (DSR) Always on -
DEFAULT
&S1
DSR
Normal
&T0
Terminate Test in Progress -
DEFAULT
&T1
Initiate Local Analog Loopback for time Set by Register S18
&T2
Not
Defined
&T3
Initiate Digital Loopback for time Set by Register
&T4
Enable Remote Digital Loopback (RDLB) Response
&T5
Disable Remote Digital Loopback (RDLB) Response
&T6
Initiate
RDLB
&T7
Initiate RDLB with Self Test
&T8
Initiate ALB with Self Test
&W0
Write S Register Into User Profile Number 0
&W1
Write S Register Into User Profile Number 1
&X0
Modem Provides Transmit Clock
&X1
DTE Supplies Transmit Clock
&X2
Slave Clock Mode (Not Supported)
&Y0
Power Up recall user Profile 0
&V
List Configuration Both Active and Stored
&Zm=An
Store Telephone Numbers into NVRAM (XL93C46) where:
m
is the Number Location (0-3)
A
is P or T (pulse or Tone)
n
is the Telephone Number
%E0
Disable line quality monitor and auto retrain.
%E1
Enable line quality monitor and auto retrain.
%E2
Enable line quality monitor and fallback/fall forward.
%L
Return received line signal level.
%Q
Report the line signal quality.
\D0
Selects AutoDial mode DTR is switched from OFF to ON the number in Z0 location
will be dial
\D1
Auto Dial disable (default)
\G0
Disable modem to modem flow control.
BBI-14.4 Installation, Operation & Diagnostics
Page B-5
