0049-3200-100
ASTRO 25 Analog Modem II / ASTRO 25 IP Modem II Install Guide
Rev. G
3
REGULATORY INFORMATION
FCC Requirements
This equipment complies with FCC rules Part 68. Located on the equipment is the FCC
Registration Number and Ringer Equivalence Number (REN). You must provide this
information to the telephone company, if requested.
The Registration Number and REN are inscribed on the printed circuit board on insert cards, or
on a label attached to either the chassis bottom or metal end-plate on standalone or rack
models. The FCC requires that these numbers be prominently displayed on an outside surface
of the equipment.
The REN is used to determine the number of devices you may legally connect to your
telephone line. In most areas, the sum of the REN of all devices connected to one line must
not exceed five (5.0). Contact your telephone company to determine the maximum REN for
your calling area.
A variety of Universal Service Ordering Code (USOC) telephone wall jacks are available for
different types of devices or services. The USOC jack required for this unit is RJ11/RJ41S/JM8.
The telephone company may change technical operations or procedures affecting your
equipment. You will be notified of changes in advance to give you ample time to maintain
uninterrupted telephone service.
If you experience trouble with this telephone equipment, please contact:
Raymar Information Technology, Inc.
7325 Roseville Road
Sacramento, CA 95842
1-800-747-1522
The telephone company may ask that you disconnect this equipment from the network until
the problem has been resolved. If your equipment continues to disrupt the network, the
telephone company may temporarily disconnect service. If this occurs you will be informed of
your right to file a complaint with the FCC. This equipment may not be used on coin service
provided by the telephone company. Connection to party lines is subject to state tariffs.
An FCC compliant telephone cord and modular plug are provided with this equipment, which
is designed to connect to the telephone network or premises wiring using a compatible
modular jack that is Part 68 compliant. See installation instructions in Chapter 2, Installation,
for details.
