RayLight rl-r7a, Instruction Manual, Page: 9 / 16

Digital Proportional Radio Control System INSTRUCTION MANUAL
- 9 -
13
、 外 型 尺寸 ：
39*20*13mm
14
、 外 观颜色 ： 黑
15
、 安 规 认 证 ：
CE,FCC
SPECIFICATIONS:
1
、
Channels : 7 channels
2
、
Model type : Arco/Heli/car/boat and 4,6Axis ;
3
、
RF Receive Sensitivity : -95dbm
4
、
Modulation: GFSK
5
、
System type: 2AFHDS
6
、
Sensitivity:1024
7
、
Failure safe: yes
8
、
Bind port: yes(Channel 7)
9
、
Power port: yes(CH3,ESC
’
s BEC,5-6V)
10
、
Power: 5-6VDC(1.5V*4)
11
、
Weight:5g
12
、
ANT lenth:26mm
13
、
Size: 39mm*20mm*13mm
14
、
Color: black
15
、
Certificate: CE,FCC
9
、
2.4G BIND OPERATION NOTES
2.4G
对码操作说明
Our products are well matched in the factory, you do not need to match by yourself. But if you are
going to match the receiver with other transmitter, or you need to change a new receiver or
transmitter, please follow the following steps:
a) Install the battery to 2.4G transmitter and shut it down.
b) Insert the matching lines to the channel BIND/CH7 port of the receiver. (Figure.1)
c) Connect the receiver battery to VCC port of the receiver (CH3, ESC
’
s BEC). on the
same time the LED are flashing and this means the receiver are going to the matching
status.
d) Press and hold the button on the transmitter, and then switch on the power supply.
e) Observe the LED on the receiver, if find that the LED is not flash anymore and that
means successful Matched. (this process about 5S)
f) Release the match button on the transmitter, take out the match line.
g) Install the server and then test.
h) If test fail, please repeat the action above.
i) If the test success, then insert the power supply port into VCC, match complete.
(The above ways of match is only suitable for RAYLIGHT 2.4G products).
PDF 文件使用 "pdfFactory" 试用版本创建 www.fineprint.cn