
Digital Proportional Radio Control System INSTRUCTION MANUAL
- 6 -
多频点跳频频工作:
此
系统
工
作
波
段
为
2.4G-2.4835GHZ,
分
160
个
频
点
。
每
个
系统使用
其
中不同的
16
个
频
点工
作
及
160
种
跳频
规
率
。
从而
通
过
开机
时间不同
及
跳频
规
率
不同
和使用频
点
不同
,
尽
最
大
可
能
让
使用
者
之
间不会同
频
。
从而
主
动
避
开
同
频
的
干扰
。
The system works in between 2.4GHZ-2.4835GHZ frequencies that have been
divided into 160 frequency point. Each system uses 16 frequencies points and 160
hopping frequency. By using various switching on time, frequency hopping and
different frequency points. The system can passively avoid frequency jamming.
全角度增益天线:
此
系统
采
用
的
是
线
性优良
的
全
波
段
的
增益
天线
,
天线
带
宽
覆盖
整个波
段宽度
。可
大大
提
升
系统发射
效
率
及
接收
的
灵敏度
。
从而
提
升
系统
的
稳
定
性
。并
加
强
了
自
身
的
被
动
抗
干扰
能
力
。
The system uses a linear spread of fine paragraph by excess antenna, which covers the
entire band width of the antenna bandwidth range, greatly enhances the efficiency of
the system launch and receiving sensitivity. It greatly improves system stability, and
strengthen the passive anti-jamming capability of the system.
独立身份识别系统
此
系统
每
个
发射机
都具
有
唯
一
的
身
份
识
别
ID
码
。
当与
接收机
进行
对码
后此
ID
码
被
存
放
在接收机内,
当
接收机
工
作
时
,
首
先
会
验证
此
ID
码是
否
正
确
。
然
后
工
作
。
否
则
不会
工
作
。此
项
可
加大
系统
的
主
动
抗
干扰
能
力
。
从而
提
升
系统
的
稳
定
性
。
Each transmitter has own unique ID. When the transmitter communicates with the
receiver, the ID will be transmitter and saved in the receiver. The System works only
when the ID is matched when the receiver powers on. This dramatically increases the
ability of passive anti-jamming and enhances the total stability of the system.
低功耗工作
此
系统
完
全
采
用
超低
功
耗
器
件,
且
接收用
高灵敏度
的
接收
芯片
。
工
作
时间
用
间
隔
发
送
方
式
。
从而
降
低
了
发射功率,
并
提
升
了
使用
工
作
时间。此
系统使用功
耗
相当
以
前
FM
版本
的
十
分
之一
。
The system uses low power consumption components, and the receiver chip is
extremely sensitive, The System uses interval signal transmission, there by reducing
the transmission power, and increasing the operating. Comparatively this system
consumes only one tenth of the normal FM system.
文件使用
"pdfFactory"
试用版本创建
www.fineprint.cn