FTECH-2022-000002-V6
Last Update: 20/07/2022
RAYLIGHT TECHNOLOGIES
Aérodrome du Versoud
38420 LE VERSOUD
Page 15/34
Internal
Step 1: Strip the threads over about 0.2
in.
Step 2: Insert the 2 conductors inside
the welding sleeve and make sure they
are overlapping one another.
Step 3: With an hot air gun
(180°Celsius), heat up the sleeve at it
center where the solder is located and
wait for it to melt.
This section applies to HERMES and HEMERA strobes.
For HERMES strobes, unused S3 wires must be insulated.
