RAYLASE SP-ICE-1 PCI/e PRO Control Cards
6
Basic Information
Chapter 1
1.3
Laser Safety
Customers assume all responsibility for maintaining a laser-safe working environment. OEM
customers must assume all responsibility for CDRH (Center for Devices and Radiological
Health) certification.
CAUTION:
Switch on the PC or the stand-alone SP-ICE-1 PCI/e PRO control card first, before switching
on the laser system. In this way you can avoid an uncontrolled action of the laser when switch-
ing on the SP-ICE-1 PCI/e PRO control card.
Check your application carefully before using the laser system. Faulty software can lock up the
complete system with no control over the laser or the scan head.
1.4
Manufacturer
RAYLASE AG
Argelsrieder Feld 2-4
82234 Wessling
Germany
Tel.: +49 (0) 81 53 - 88 98 - 0
Fax: +49 (0) 81 53 - 88 98 - 10
http://www.raylase.de
E-mail: [email protected]
1.5
Customer Support
The RAYLASE customer service is available for your problems either in respect to the subsys-
tem or this manual. Before calling the customer service, please make sure you have refered to
any appropriate sections in the manuals on the supplied CD, that may answer your question.
If you need further assistance call RAYLASE customer service, Monday through Friday
between 8 A.M. and 5 P.M. (Central European Time).
Germany (Wessling)
+49 (0) 81 53 - 88 98 – 0
E-Mail: [email protected]
... ask for the customer service
1.6
Conformity with directives
The Control Card conforms to the requirements of the following directives:
᪺
EU Directive 2004/108 / EC (EMC)
᪺
2012/19 / EC (WEEE - Implementation by German Electrical and Electronic Equipment)
᪺
2011/65 / EU (RoHS II - German implementation by ElektroStoffV)
For details of conformity with other directives, contact RAYLASE.
1.7
Disposal
For the disposal of the Control Card, note local policies, regulations and laws.
