TECHNICAL DATA
Model:
26048
Nominal tension: 220V-240V ~ 50Hz
Consumption of energy: 2000W
Class of Protection:
II
ATTENTION
It read take careosamente all the instructions before using and save for future queries.
GENERAL
The manufacturer does not hold responsible by any eventual damage caused by an unsuitable or
wrong use.
When they use electrical groups, have to take some basic cautions to reduce the risk of fire, electrical
shakes, burns and other damages. For this have present the instructions of security indicated.
WARNINGS OF SECURITY
1. WARNING: it does not have to cover this device. Cover this device presents risk of fire and will
activate the fuse of security; deshabilitar permanently the unit.
2. It use only the voltage specified in the label of classification of the device.
3. Keep all the objects at least to 1 metre of the frontal part, lateral and back of the device.
4. This appliance is allocated only for domestic use and no for commercial or industrial use.
5. Only for use in interiors.
6. It do not use products of abrasive cleaning in this device. It clean with a humid cloth (no wet)
enjuagado only with hot soapy water. It withdraw always the plug of the electrical network before
cleaning it.
7. The common cause of the overheating are the deposits of dust or lints in the device. Ensure that
these deposits delete regularly unplugging the device and aspiring the rejillas of ventilation and rejillas.
8. It unplug always the device when it was not into use.
9. When the device have been desempacado, verify that there are not damages in the transport and
ensure that they have delivered all the pieces. If they are missing pieces or the appliance is damaged,
communicate with the team of attention to the customer.
10. If his appliance does not work or does not work properly, communicate with the place of purchase
or with the Team of attention to the customer.
11. It do not connect the device to the electrical network until it was entirely assembled and adjusted.
12. Ensure that the hands are dry before manipulating the plug or the main unit.
13. It do not situate the device directly under a taking of current.
14. Ensure that the device was in a flat surface, stable and resistant to the heat.
15. It do not operate with the game of wires rolled up since it is likely that accumulate heat, what could
be sufficient to turn into a danger.
16. Make comprobaciones periodic of the wire of feeding to ensure that there are not evident
damages.
17. It do not operate this device with a wire damaged, plug or after the appliance do not work properly
or have fallen or damaged somehow. It give back to an electrical person described for his examination,
electrical service or repair.
18. It do not withdraw the plug of the taking of current throwing of the wire; Always it hold the plug.
19. It do not twist, double neither roll up the wire around the device, since this can weaken and divide
the isolation. Ensure always that it have removed all the wire of any area of storage of the wire and
unroll before using it.
20. It recommends that this device was enchufado directly to the taking of current. It does not
recommend the use of boards of feeding, since a lot of signposts of feeding are not designed to supply
energy to appliances of high power.
21. Can use a wire of extension without damages properly specified with this artefact, whenever it use
of safe way.
22. It use this alone device as it describes in this manual. The manufacturer does not recommend any
another use and can cause fires, electrical downloads or injuries.
23. It do not withdraw the plug of the taking of common until the device have turned off.
