Wuhan Raycus Fiber Laser Technology Co., Ltd
User manual QCW450/1500
6
personnel. In order to prevent electric shock, please do not break the seal or
uncover the shield. Failure to comply with this instruction will void the warranty;
3) Please check the fiber connector carefully to prevent dust or other pollution.
Please use special paper when cleaning the fiber connector lens.
4) If the laser is not used according to the method specified in this manual, the
laser may be in abnormal working state and cause damage.
5) It is not allowed to install the fiber connector when the laser is in operation;
6) Do not look into the output head directly. Wear appropriate protective eye
glasses all the time when operating the laser;
2.5 Precautions for Use
1) Make sure that the correct voltage of 220VAC power source is used.
Failure to connect power source correctly will damage the device
2) Failure to follow the instructions may cause malfunction and damage to the
device, such damage is not covered by warranty.
3) Please cap the output head when it is not in use, and make sure the cap is
clean;
。
4) It is not allowed to install the output head when the laser is in operation;
5) Failure to follow the instructions may cause malfunction and damage to the
device, such damage is not covered by warranty
2.6 Specifications
Table 3 Product Specifications
Models
RFL-QCW450/1500FS
Testing Environment
Optical Characteristics
Operation Mode
CW/
pulse
Vibration direction
Random
Maximum average power
(W)
450
（
pulse
）
500
（
CW
）
Maximum peak power(W)
1500
Repetition rate (Hz)
50-5000
Rated output power
