User’s guide Ytterbium Pulsed Fiber Laser RFL-P200 Ver.: 1.0
12
Figure 5: QCS Output head (unit: mm)
CAUTION:
Inspect the aperture before install the output head to the processing head.
Clean the aperture if necessary.
It is strictly prohibited to disassemble the output head for Non-Raycus
Personnel, or the warranty is void.
3.2
Cooling Requirements
Table 5: Cooling Requirements
Parameter
Unit
200W
Cooling Capability
W
>1000
Minimum Flow
L/min
4
Maximum Pressure
Bar
8
Pipe Outside Diameter
mm
10
CAUTION:
The water pressure to the QCS output head must be less than 2bar, or the
head will be damaged. Such damage is not covered by guarantee.
