Wuhan Raycus Fiber Laser Technologies Co., Ltd.
User Guide of RFL- RFL-C8000S
17
4 Using the Product
Please use the correct the latest PC software and the
relevant manual.
4.1 Front Panel
Figure 6 shows the front panel of RFL-C8000S
：
Figure 6 Front Panel of RFL-C8000S
1. REM/OFF/ON:
Key switch, the control system power switch of the laser. Insert the
key; either turning the key clockwise to the 'ON' position or counterclockwise to 'REM'
position (short-connect the Pin 8 and Pin 9 of Table 7) will power on the laser control
system. Then the laser will enter a control mode depending on your previous setup on
the 'CTRL-INTERFACE'. You can refer to
4.8 Control Mode
for more details.
2. POWER:
The control system power, GREEN, indicates that the control system is
switched on.
