Raycus RFL-C6000S-CE, User Manual

Page: 23 / 55

Wuhan Raycus Fiber Laser Technologies Co., Ltd.
User Guide of RFL-C6000S-CE
23
Passive contact, not
connected to external
voltage or grounding.
9 RPB
10
Remote Start
Button
START-
A
Instantaneou
s Contact
Closure
Input
24Vdc --- 1s
In REM mode, start
the laser main power
supply.Passive
contact, not connected
to external voltage or
grounding.
11 START-B
12
Analog Input
to Control
Current
1-10V Analog Input
1-10
Vdc
10 mA 100µs
Analog Input 1-10
VDC= 10 – 100%
Setpoint
13
Analog Output
Power Monitor
AOUT
Analog
Output
0-8.0
Vdc
>5mA 20µs
Analog Output
0-8VDC
（
Refer to
factory inspection
report for details
）
14
Isolated
Analog Com
AGND Return --- --- ---
Return for signals on
pins 12, 13
15 Mod MOD+ Digital Input 24V
d
C
<10
mA
20µs 24 VDC Input
16 Modulation- MOD- Return --- --- ---
Return for signal on pin
15
17
Guided Laser
Control
RED-LAS
ER
Digital Input 5-24Vdc
<10
mA
120ms
Positive edge activates
emission in REM mode
18
Emission
Enable
LAS-C Digital Input
5-24Vd
C
<10
mA
120ms
Positive edge activates
emission in REM mode
19 READY READY Digital output 24VdC
＞
10mA
120ms High=Laser is ready
20
System
Common
GND2 Return --- --- ---
Return for pin
17/18/19/21/22/23/24
21 Error RESET RESET Digital Input
5-24Vd
C
<10
mA
120ms
Rising edge reset (the
resettable alarm)
22 Laser Alarm S-ERR Digital output 24VdC
＞
10mA
120ms High=Alarm status
23 Power started POWER Digital output 24VdC
＞
10mA
120ms
High= The main power
supply is started
24 Laser emission LASER Digital output 24VdC >10mA 100ms High=Laser is emission