Wuhan Raycus Fiber Laser Technologies Co., Ltd.
User Guide of RFL-C4000S-CE
31
4.7.6
The Mode Selection function
Select the operating mode of the software, including monitor mode, control mode,
diagnostic mode, and debug mode.
Monitor mode:
The monitor mode is selected by default when the software is opened.
The most commonly used and concerned information is displayed on the software interface to
avoid the interference of too much information to the user. The monitor mode can be used
without password.
Control mode: The control mode adds the function of the operable control interface on the
basis of the observation mode, and the password is required to enter the control mode.
Debug mode: On the basis of diagnostic mode, the parameter setting interface is added.
Only Raycus debug engineers can enter the encryption mode.
Diagnostic mode:When a laser fails to diagnose remote after -sales, or the integrated dealer
needs to understand more status information of the laser, you can enter the diagnostic mode.
4.7.7
Main control module
The main control module contains all states, alarms and system parameters of the main
control module. The status and alarm information are automatically refreshed. Only when the
currently selected page is in the main control module, the upper machine software will
automatically read and refresh status and alarm information information information. , Reduce
the frequency of communication and avoid too many resources to occupy the main control
module.