Wuxi Raycus Fiber Laser Technologies Co., Ltd.
User Guide of Raycus 1000W
～
2000W laser
13
3.2 Output Head and Installation
Figure 4 shows iHQB Output Head
：
Figure 4 Dimensions of iHQB Output Head (unit: mm)
Inspect the output lens before installing the output head to the processing head.
wipe the output lens with absolute alcohol if it is unclean.
When the output head is installed into the welding head, the welding head
groove must be ensured to be connected to the two copper rings of the output
head, otherwise an alarm will be generated.
It is strictly prohibited to disassemble the output head by personnel not approved
by Raycus, or the warranty is void.
3.3 Cooling Requirements
Table 6 Cooling Requirements
Parameters
unit
RFL-A1000D
RFL-A1500D
RFL-A2000D
Cooling Capability
W
≥3000
（
1.2 HP
）
≥4000
（
1.6 HP
）
Minimum Flow
L/min
8
10
Maximum Pressure
Bar
7
Pipe Outside Diameter
mm
connector which could be plugged fast and straight-through
（
OD Φ10
，
PU
）
Water Chiller
Categories
/
dual-temperature control
a
）
The water temperature setting of cooling system:
受
控
武汉锐科
