4
•
Be concentrated when using the tool. Look at what you do, make sense and do not use the
tool when you are tired.
•
Remove the blade guard before using the tool.
•
A damaged guard or other part must be properly repaired or replaced by an authorized
service center, unless otherwise specified in this instruction manual.
•
Do not use the tool if the starter is not working (if it cannot be turned ON and OFF).
•
Place the equipment in a well-lit area on a flat, stable, dry and well-ventilated surface, away
from flammable materials and with plenty of space for sparking and sharpening waste.
•
Do not allow anyone, especially children, to come within a radius of at least five meters
around the work area when all work is in progress.
•
Immediately stop the tool in the event of a malfunction of the motor or the ON/OFF button
or in case of unusual noise.
•
Do not use the tool if the starter is damaged.
•
Do not move the chain with your hand with the wheel moving.
•
Do not stop the chain with your hands or other objects.
•
Treat the chain teeth with caution during operation; they can cause severe cuts.
•
When not in use, the machine must be stored in a dry, locked place out of the reach of
children.
•
Before using the product and after any shock, please check it for signs of wear or damage.
Please carry out repairs if necessary.
•
Always switch off the machine:
o
Every time you leave the device unattended;
o
Before releasing an obstruction;
o
before checking, cleaning or working on the product;
o
after hitting a foreign object;
o
Every time the product starts to vibrate abnormally.
•
Pay attention to foot and cutting injuries.
•
Inspect and regularly service the product. Repairs should be carried out only by an
authorized service center or a similar qualified specialist.
•
When not in use, store the product out of the reach of children.
•
Children should not play with plastic bags, sheets and small parts! Keep them out of the
reach of children. There is a danger of suffocation!
•
When transporting the tool, always add the blade guard to the blade. Always carry the tool
by holding the handle, never the blade.
•
Do not use the product on a slippery surface.
•
Do not use the product on steep, slippery slopes.
•
When planning your work schedule, allow enough time for rest. Limit continuous use of the
device, e.g. use 30 ~ 40 minutes per session, and take 10 ~ 20 minutes of rest between
work sessions. Work a maximum of two hours per day
•
If the machine has struck foreign objects, check if the tool is damaged and bring it to repair
if necessary.
•
Do not place any part of the body on the chain when the chainsaw is operating. Before
starting the chain saw, make sure that the chain is not in contact with anything. A moment
of inattention during use may cause your clothing or body part to stick to the chain.
•
Always hold the chainsaw back handle with your right hand and the front handle with your
left hand. Hold the chainsaw by inverting your hands increases the risk of personal injury
and should never be used.
•
For the chainsaw designed with the chain guide on the left side, the reference to the "right
hand" and "left hand" positions is reversed.
•
When cutting a branch that is under stress, pay attention to the risk of elastic return. When
the tension of the wood fibers is released, the spring-loaded limb may strike the operator
and / or project the chain saw out of control.
•
Exercise extreme caution when cutting brush and young shrubs. Fine materials can grip
the cutting chain and be thrown as a whip in your direction, or you lose balance under the
effect of traction.
•
Follow the instructions for lubrication, tension and chain change accessories. A chain
whose tension and lubrication are incorrect can either break or increase the risk of rebound.
•
Keep handles dry, clean and free of oil and grease. Oily, greasy grips are slippery and
