2017 ©Raycap • All rights reserved
130 620 300 Rev.C 171116
Page 5 of 24
www.raycap.com
INSTALLATION MANUAL
ProSMS 8
2.3
Symbols
The DANGER sign denotes a hazard. It calls attention to a procedure, practice, or the like,
which, if not correctly performed or adhered to, could result in personal injury or death. Do not
proceed beyond a DANGER sign until the indicated conditions are fully understood and met.
The WARNING sign denotes a hazard. It calls attention to a procedure, practice, or the like,
which, if not correctly performed or adhered to, could result in personal injury or death. Do not
proceed beyond a WARNING sign until the indicated conditions are fully understood and met.
The Caution sign indicates a hazardous situation which, if not avoided, could result in minor
or moderate injury.
The Indication sign Indicates a situation that can result in property or device damage if not
avoided.
Refer to all the documentation supplied with the ProSMS String Monitor Solution.
Warning of dangerous electrical voltage. The ProSMS String Monitor solution is connected to
high voltages. All work on the device must only be carried out by electrically skilled persons.
Disconnect before installing, removing, carrying out maintenance or repair.
Direct current marking (DC)
The CE marking is the legal required labeling for several EU Directives of the European
Union. This CE marking shows that the product complies with all the relevant European
Legal Directives.
Indicates important information.
3.1
Package contents
1 ProSMS 8 unit
3.2
Prerequisites
This document describes how to install the ProSMS 8. It covers how to mount the units as well as
connections to its interfaces.
Installers of Raycap’s ProSMS 8 should read this installation guide thoroughly prior to installation of the
unit.
3.3
Installation tools
WAGO 210-721 Type 3 partially insulated Operating Tool (5.5 mm Blade, 0.8 mm Tip) or similar
(Common negative output, String inputs and Voltage input terminals)
WAGO 210-619 Type 1 partially insulated Operating Tool (2.5 mm Blade, 0.4 mm Tip) or similar
(MODBUS, digital inputs, digital outputs terminals and DIP switch settings)
CAUTION
VOLTAGE
DANGER
WARNING
NOTICE
CAUTION
VOLTAGE
DANGER
WARNING
NOTICE
CAUTION
VOLTAGE
DANGER
WARNING
NOTICE
CAUTION
VOLTAGE
DANGER
WARNING
NOTICE
CAUTION
VOLTAGE
DANGER
WARNING
NOTICE
CAUTION
VOLTAGE
DANGER
WARNING
NOTICE
CAUTION
VOLTAGE
DANGER
WARNING
NOTICE
CAUTION
VOLTAGE
DANGER
WARNING
NOTICE
CAUTION
VOLTAGE
DANGER
WARNING
NOTICE
CAUTION
VOLTAGE
DANGER
WARNING
NOTICE
Summary of Contents for ProSMS 8
Page 2: ......
