RAY User Guide
Using RAY
46
4
In the same way as you can dial the phone number that you entered (as
described above in Step
4
)
some of the number keys in the Dialer have
additional functionality. You can activate this functionality
by sliding your
finger to that number, leaving your finger on that number until RAY says the
name of the function and then lifting your finger to activate it. The following
options are available:
Number 2 – Read:
To have RAY read the number out to you, slide your
finger towards the number 2 and leave it there until RAY says
Read
.
Number 8 – Delete Number:
To erase the last digit that you entered,
slide your finger towards the number 8 and leave it there until RAY says
Delete Number
.
Number 7 – Delete:
To erase the entire number, slide your finger
towards the number 7 and leave it there until RAY says
Delete
.
Number 1 – Previous Screen:
To return to the previous screen and
leave the Dialer, slide your finger towards the number 1 and leave it there
until RAY says
Previous Screen
.
5
During a call, you can perform the following:
To terminate the call, short press the ON/OFF button.
To toggle the speakerphone on and off, swipe your finger from the middle
of the screen downwards.
Answer
Answer
Answer
Answering/Rejecting
ing/Rejecting
ing/Rejecting
ing/Rejecting a
a
a
a Phone Call
Phone Call
Phone Call
Phone Call
Upon receiving an incoming phone call, RAY reads out the name or number of the
caller. RAY can only read out the name of the caller if his/her number is in the
Contacts List.
►
To answer the call:
To answer the call:
To answer the call:
To answer the call:
•
Short press the ON/OFF button.
►
To
To
To
To reject
reject
reject
reject the call:
the call:
the call:
the call:
•
Press the Volume Down key.
Calling a Contact
Calling a Contact
Calling a Contact
Calling a Contact
►
To make a phone call using the Contacts List screen:
To make a phone call using the Contacts List screen:
To make a phone call using the Contacts List screen:
To make a phone call using the Contacts List screen:
Refer to the
Making a Call
section on page 15 for a full description.