Figure G - Clear Control Panel Plastic, Shown Propped Up Against Glass
2. INSTALL ADHESIVE-BACKED FOAM WASHERS ON DECALLED CONTROL PANEL
•
INSTALL (9) ADHESIVE-BACKED FOAM WASHERS ATOP THE DECAL ON
THE CONTROL PANEL OF THE CABINET. (5) WILL BE INSTALLED AT THE
OUTER HOLE LOCATIONS OF THE CONTROL PANEL PLASTIC HOLE
MOUNTS AND (4) WILL BE INSTALLED AT THE JOYSTICK PLATE
THROUGH HOLES ON THE CONTROL PANEL. (NOTE: ADHESIVE ON BACK
OF FOAM WASHERS IS PERMANENT. CARE MUST BE TAKEN WHEN
INSTALLING THESE AS THE ADHESIVE WILL STICK TO DECAL
IMMEDIATELY AND REALIGNMENT WILL NOT BE POSSIBLE.)
Figure H - Install Foam Washers Centered on (9) Control Panel Holes
Reference
Figure G
above for
precise hole
locations.
Foam
washer hole
locations.
Foam
washer hole
locations.
