The following are GENERIC instructions for remotes. Instructions that come with your
remote should supersede the below.
If you are using an On / Off remote, or a Multi-Function remote:
1)
Connect the red, green and blue wires from the Brush Housing (BH) together with
the “12V OUT” wire from the remote.
2)
Connect the “12V IN” wire on the remote to one side of the switch.
3)
Connect the other side of the switch to one side of the fuse.
4)
Connect the other side of the fuse to the “+” side of the battery.
5)
Connect the Black wire from the Brush Housing (BH) to the ground “GND” wire
from the remote.
6)
Connect the other ground “GND” wire from the remote to the “-“ side of the
battery.
7)
The extra blue or “ANT” wire on the remote does not connect to anything.
BH
Switch
Fuse
+
B
att
er
y
-
Remote
