Note:
· Line up the center of phone with the charging coils to achieve efficient charging.
· Phones with cases more than 0.2 inch / 0.5 cm thick will not be detected. Remove
before charging.
Charging will start automatically with a right connection and the charging indicators
will light up accordingly.
Charging Indicators
Turns blue for 10 seconds,
then turns off
Turns on solid blue
Blue indicator turns off
Flashes red
Working Status
Standby
Charging a compatible device
Device fully charged
FOD (Foreign Object Damage)
alarm
Model
Input (Wireless Charger)
Output (Wireless Charger)
Powering the Wireless Charger
RP-SH015
5V / 2A, 9V / 2A
10W Max (Android)
7.5W Max (iPhone)
Caution
· The charging process may give off heat so your device will become warm. Use only
in cool environments.
· If the product gets wet, please stop the charging process immediately and remove
all plugs. Do not use it before it’s completely dry.
· Do not drop, knock, or squeeze the product.
· Do not dismantle or throw the product in fire or water, to avoid causing short
circuit leakage.
· Do not use the wireless charger in severely hot, humid, or corrosive environments
to avoid circuit damage and leakage.
· Do not use the charger if it has excessive dents, punctures, damages, or deformities.
· Do not place close to magnetic stripe or chip card (ID card, bank cards, etc.) to
avoid magnetic failure.
· Make sure the back of your phone or phone case is even without foreign metal
objects.
· Keep at least 20 cm / 7.9 in away from implantable medical devices (pacemakers,
implantable cochlear, etc.) to avoid potential magnetic interference.
· Keep away from children.
05/06
