Company Confidential
31
Raveon Technologies Corp.
200mS, then the TDMATIME must be at least 17.4 seconds so a value
of 20seconds for the TDMA time is appropriate.
8.4.
Debug Related Commands
Bench Testing
(Must be in command mode to test. Enter SETPORT [[[+++]]] at the keyboard to put unit into config/test
mode.)
ATTD x
Various transmit test routines.
0 = Go back to normal mode. Stops the test.
1 = Random data transmit.
2 = Hop up/down one channel
3 = Force PLL to fast lock mode
4 = Transmit all 0s
5 = Transmit all 1s
6 = Enable the test points on the PCB.
7 = Transmit CW on center of channel
8 = Transmit preamble (101010 pattern)
SHOW
Display an overview of the configuration.
Ping xxxx
Ping another modem over the air. Transmits a request to xxxx to see if
xxxx can hear the sending station. If it does, it answers with a response
transmission, containing its ID and the signal strength of the reception.
ATST
Display statistics of how the modem is working.
ATST 1
Display statistics of how the modem’s GPS is working.
