Company Confidential
20
Raveon Technologies Corp.
5.9.
Ethernet Related Commands
The following commands are used to configure the Ethernet interface on of the
RV-M29
.
Command
Command Description
Parameters
Factory
Default
IPADDR
2,3
Internet Protocol Address.
Get or set
the unit IP Address in dotted quad
decimal
1
notation.
[Value is stored after the user logs out.]
<aaa.bbb.ccc.ddd>
192.168.26.128
IPMASK
2,3
Internet Protocol Address Mask.
Get or
set the unit IP Address Mask dotted quad
decimal
1
notation.
[Value is stored after the user logs out.]
<aaa.bbb.ccc.ddd>
255.255.255.0
IPGATEWAY
Internet Protocol Gateway Address.
Get or set the unit IP Gateway Address in
dotted quad decimal
1
notation.
<aaa.bbb.ccc.ddd>
192.168.26.1
ADMINLOGIN
Administrator Role Login Name.
Get or
set the unit ADMIN role login name.
1 to 10 ASCII
characters
admin
ADMINPWD
Administrator Role Password.
Get or
set the unit ADMIN role password.
1 to 10 ASCII
characters
admin
USERLOGIN
User Role Login Name.
Get or set the
unit USER role login name.
1 to 10 ASCII
characters
user
USERPWD
User Role Password.
Get or set the unit
USER role password.
1 to 10 ASCII
characters
user
DATALOGIN
Data Role Login Name.
Get or set the
unit DATA role login name.
1 to 10 ASCII
characters
data
DATAPWD
Data Role Password.
Get or set the unit
DATA role password.
1 to 10 ASCII
characters
data
TCPPORT
Gets/Sets the TCP port number
to use
for telnet sessions.
1-65525
23
ETHRATE
Gets/Sets the Ethernet port data rate
.
100 or 10
100
Notes:
1.
“Dotted quad decimal” notation is also known as “dotted decimal” notation.
2. Because changes to these settings may disable Ethernet access to the radio modem, requested changes to these settings must
be confirmed by user action. Immediately following entry of each of these parameter change requests, the RV-M29 will respond
with:
Enter
YES
<CR> to confirm this configuration change, or
NO
<CR> to cancel it.
3. Changes to these parameters may only be supported via the factory serial port interface.
