Pagina 19 di 33
RAVENNA s n c - OFFICINE METALMECCANICHE RIMORCHIO PER TRATTORE
Photo 3
Photo 4
If the tractor there is a system of automatic hookup, verify that the connection was
successful. Pull the brake lever from its R bayonet mount on the rudder S and assemble in
the same slot on the tractor (Photo 4).
Connect finally, using the respective quick connections, the pipe of the tipping cylinder
body and the power cable of the rear lights respectively to the hydraulic system and the
electrical system of the tractor.
After attaching the trailer to the tractor, check:
•
The correct functioning of the hydraulic tipping body correct operation of the braking
system
•
The correct functioning of the electrical system.
4.4 LOADING TRAILER PROCEDURE
Before proceeding with the loading, turn off the tractor engine and enter the parking brake.
With the trailer horizontal as possible and using suitable lifting tackle, place the load in a
central position with respect to the body: With the trailer horizontal as possible and using
suitable lifting tackle, place the load in a central position with respect to the body: for bulk
materials do not exceed the top of the side. Fix the load with ropes or chains of adequate
size pulling them with suitable devices of the trailer.
P
Q
