Raven viper Installation & Operator'S Manual Download Page 24

Page: 24 / 182

HAPTER

Viper/Viper 4+ Installation & Operation Manual

USER PROFILE

User profiles may be created for each operator to save user preferences such as language and displayed units to

maximize each user’s comfort level while operating the equipment with ROS. Each user profile may also be

assigned a unique Personal Identification Number (PIN) to secure the ROS device from unauthorized access,

modifications, or operations from the operator.

In addition to securing the system from unauthorized use, ROS saves active user profile information with each job

report. If multiple operators will be using the same machine during a specific field operation, the job report will

contain a list of users that completed the specific field operation. The system administrator may also review the

specific field areas in which each operator was logged in and operating the equipment.

Refer to Chapter 5, Administrator and User Profiles, for more information on setting up and using administrator

and user profiles.

SYSTEM MANAGER

Access the system manager utility within the administrator or user panel to perform software updates and CAN

node firmware updates. Product software and documentation updates may be made available periodically on the

Raven Applied Technology web site:

www.ravenhelp.com

NOTE:

Refer to Chapter 6, System Manager, for more information on performing system and hardware

updates.

FILE MANAGER

Access the file manager to perform file maintenance, access utilities for exporting and transferring job files and

other data to and from the ROS device, and to view the transfer history for previous job data.

NOTE:

Refer to Chapter 7, File Manager, for more information on performing file maintenance.

Do not store job and field information on the ROS device for long term reference or archiving.

Perform file maintenance regularly and remove files associated with completed jobs or field

operations to ensure memory resources are available for new operations as needed. Archive and back

up job and field information on a home or office PC to ensure the data is securely archived and

backed up.

MACHINE CONFIGURATION PANEL

The Machine Panel contains the following utilities for

selecting and configuring the various types of vehicles

and equipment with which the ROS device will be

operated:

NOTE:

On initial start up, ROS will require a

machine configuration before other

system features may be accessible. Refer

to Chapter 3, Start Up, for an overview of

the initial settings required and the

recommended procedure to complete

setup of the ROS device.

Summary of Contents for viper






















































































































































































Search results

Summary of Contents for viper

Reviews:

Related manuals for viper

Brands by name

Popular brands

Raven viper, Installation & Operator'S Manual

Search results

Summary of Contents for viper

Reviews:

Related manuals for viper

Brands by name

Popular brands