![background image](http://html.mh-extra.com/html/raven/viper-4/viper-4_installation-manual_788949016.webp)
Chapter 2
12
Viper® 4 and Viper 4+ Installation Manual
USB Ports
Two USB 2.0 ports are available on the side of the Viper 4 and the Viper 4+. These ports are used to perform
system updates, file maintenance if wireless communications are unavailable in the vehicle cabin, or allow the
operator to connect other USB devices as necessary.
Note:
Insert the USB flash drive only when necessary. Do not start the field computer with a flash drive
connected or leave the drive inserted during normal operation.
Camera Inputs
Up to four separate video cameras may be connected to the Viper 4 and the Viper 4+ to help the operator
monitor equipment functions or product levels on the system.
DGPS Antenna
The antenna ports on the Viper 4 and the Viper 4+ are used to pass position information onto the integrated
DGPS receiver (if available). This port is used only if the integrated DGPS receiver will be used during field
operations for location and course corrections.
For equipment utilizing or requiring an external receiver for location and course correction, the connector
labeled “DGPS” on the console cable must be used to pass correction information to the Viper 4 and the Viper
4+.
Wi-Fi Antenna
The Raven Viper 4 and the Viper 4+ field computers are ready for future wi-fi connectivity and communication
options.
CAUTION
Damage to the field computer may occur if the
USB ports are used to charge mobile devices
such as cellular phones, tablets, or mp3
devices. The USB ports should only be used for
performing file transfer and maintenance.
Summary of Contents for Viper 4
