Setting Up Your Scanner
Install the Scanner
1.1 Hold the ADF Paper Tray and insert 1.2 Pull out the extension to the length
two pins to the holes on the top of the of the document. Pull the Output Tray
scanner as shown. and raise the paper stopper to prevent
the paper from falling.
Connect to Power
2.1 (Optional) Connect one end of your 2.2 Connect one end of the power
cable
Ethernet LAN cable to an available port of to the power receptacle of the
product.
your Ethernet Hub, connect the other end to Connect the other end to an
port marked
at the back of the product. appropriate power outlet.
11
