Manual No. 016-3001-002
15
CHAPTER
4
CHAPTER 4
Air Clutch Systems
Installation
Process Overview
To install the SmartRow Electric Clutch, you must complete the following steps:
1.
Install the Power Harness.
2.
Install the Planter Harness.
3.
Install the Remote Switch.
Recommendations
Observe the following recommendations while installing the AutoBoom system:
•
Use part numbers to identify parts.
•
Do not remove the plastic wrapping from a part until it is necessary for installation.
•
Do not remove plastic caps from a part until it is necessary for installation.
Summary of Contents for SmartRow
