![background image](http://html.mh-extra.com/html/raven/smartrow/smartrow_installation-manual_789025013.webp)
Manual No. 016-3001-002
9
Electric Clutch Systems Installation
3
To Install the Planter Harness
1.
Route the 14 pin connector to the planter hitch and secure with the supplied straps.
2.
Locate the existing electric clutches on the planter and route the section leads to their respective
clutch.
Section Orientation: (Seated in the tractor, facing forward)
•
Section 1 = Left outer clutch (Black)
•
Section 2 = Left inner clutch (Brown)
•
Section 3 = Right inner clutch (Blue)
•
Section 4 = Right outer clutch (Green)
Note:
The example above is for a 4 clutch system. For a 2 clutch system, Section 1 would be the
left clutch and Section 2 would be the right clutch, etc.
Important:
Be sure to route the section leads along the existing wiring harness to
prevent the section leads from being stretched or pinched during folding
operations.
Summary of Contents for SmartRow
