Raven SmarTrax MD, Installation Manual

Page: 22 / 36

Chapter 3
18 John Deere 8X60 and 8X70 Series SmarTrax™ MD Installation Manual
FIGURE 18.
Anti-Rotation Pin Installation Locations
1.
Determine the anti-rotation pin (P/N 107-4001-004) installation location on the mechanical drive (P/N 063-
4001-010) based on the anti-rotation bracket installation location.
2.
Screw the anti-rotation pin into the mechanical drive’s casing.
FIGURE 19.
Anti-Rotation Pin Installed in Bracket Assembly
3.
Insert the anti-rotation pin into the installed flanged bearing (P/N 325-0000-036) on the anti-rotation bracket
assembly.
Note:
If the steering column collar was reinstalled, it may be necessary to shorten the length of the
steering column collar in order to allow the anti-rotation pin to be installed.
Anti-Rotation Brackets
Installed on Right Side
of Column Anti-Rotation Brackets
Installed on Left Side of
Column
Anti-Rotation Pin Inserted
into Anti-Rotation Bracket
Assembly