Raven SmarTrax Case IH Titan 4030, Installation Manual

Page: 17 / 44

3
Manual No. 016-4001-127 Rev. B 13
Hydraulic System Installation
8.
Connect the machine’s right steering hose to the opposite end of the installed tee fitting.
9.
Install the 90° end of the supplied hydraulic hose (P/N 214-1000-663) on the 90° end of the installed tee
fitting.
Note:
It may be necessary to install a -8 ORFS M/F 90° swivel elbow fitting (P/N 333-0012-067) on the
tee fitting to achieve the connection.
10.
Connect the straight end of the installed hydraulic hose to the fitting installed in Port B of the SmarTrax
valve.
Note:
It may be necessary to install a -6 ORFS M/F 90° swivel elbow fitting (P/N 333-0012-065) on the
fitting installed in Port B of the SmarTrax valve to achieve the connection.
Install the Pressure and Tank Hoses
FIGURE 6.
Pressure Hose Installed
1.
Disconnect the machine’s pressure hose from the steering orbital.
2.
Install a -8 ORFS M/M/F swivel run tee adapter fitting (P/N 333-0012-028) in the open port of the steering
orbital.
3.
Connect the machine’s pressure hose to the opposite end of the installed tee fitting.
4.
Install the 90° end of the supplied hydraulic hose (P/N 214-1000-664) on the 90° end of the installed tee
fitting.
Note:
It may be necessary to install a -8 ORFS M/F 90° swivel elbow fitting (P/N 333-0012-067) on the
tee fitting to achieve the connection.
5.
Connect the straight end of the installed hydraulic hose to the fitting installed in Port P of the SmarTrax
valve.
Note:
It may be necessary to install a -6 ORFS M/F 90° swivel elbow fitting (P/N 333-0012-065) on the
fitting installed in Port P of the SmarTrax valve to achieve the connection.
Pressure Port